| Widescreen Gaming Forum http://www.wsgf.org/phpBB3/ |
|
| Problem with active display port to dvi-D and 1680*1050 http://www.wsgf.org/phpBB3/viewtopic.php?f=66&t=18186 |
Page 1 of 2 |
| Author: | mimix [ 19 Oct 2009, 17:12 ] |
| Post subject: | Problem with active display port to dvi-D and 1680*1050 |
hi everybody ! i'm so happy to having recieve my accell cable ( ultraAV display port to DVI-D ) bu I have a big problem with it ! i can't enter my resolution (1680*1050) in the graphic control pannel i just look 1600*1200 or 1440*900 around this resolution... and when try to use eyefinity, the resolution is not good and stretched... do you have a solution for that ? |
|
| Author: | mimix [ 19 Oct 2009, 17:40 ] |
| Post subject: | Problem with active display port to dvi-D and 1680*1050 |
youhouuuuuuu !! i found ! that's tips: in catalst window go to gestion of monitors, do right clic on the bad monitor, properties.. a window appears with avvivo and HD parameters. in HD parameters activate 1080p 60Hz ! when you activate it, the correct resolution will appears in the windows 7 display configuration ! edit: but eyefinity doesn't work yet ... arrrrgh !!! the problem is not really solve, i have force the resolution when activate 1080p, but the image is "fade" (or melted, i don't know this word in english) and i have try many test and at the end, the third screen refuse to work ! windows says he can't save my configuration, and ati drivers freeze and restart at the beginning when i try to activate my third screen... i have doing system restauration and now i can re-activate my third screen but the bug with resolution is also here. i'm waiting whql drivers from ati and i hope they will solve the problem... |
|
| Author: | mimix [ 23 Oct 2009, 13:56 ] |
| Post subject: | Problem with active display port to dvi-D and 1680*1050 |
up !!! did someone has the same problem or tested three 22" on one HD5870 with the accell's or dell adapter ? the new drivers hasn't solved my problem ! |
|
| Author: | Gunja [ 23 Oct 2009, 14:38 ] |
| Post subject: | Re: Problem with active display port to dvi-D and 1680*1050 |
Sounds like you have a mix of 16:10 and 16:9 monitors (or i misunderstood) 1680x1050 = 16:10 1600x1080 = 16:9 eyefinity only works with same resolution on all 3 screens. what kind of monitors do you have? |
|
| Author: | mimix [ 23 Oct 2009, 15:47 ] |
| Post subject: | Problem with active display port to dvi-D and 1680*1050 |
i have only 16/10 monitors in 1680*1050. (three zalman trimon 22") but in catalyst window i can activate a 1080p 60hz mode for hdtv. (by ticking a case) but ticking this case don't force 1080p mode ! she juste allow me to setup this resolution in windows 7 resolution window. and between 1600*1200 and 1920*1080 there is ... 1680*1050 !!! the resolution appears and i can select and apply her !!! but with this method i can't activate eyefinity because it's a forced mode ! not a native mode... an activate eyefinity will appears 3 monitors in 1680*1050 in clone mode. i can't have one display with 5040*1050 and try to desactive eyefinity after that cause many bugs and black screens... |
|
| Author: | fercorwin [ 23 Oct 2009, 17:16 ] |
| Post subject: | Problem with active display port to dvi-D and 1680*1050 |
i can perhaps help a bit (but not in english i am french too :p so send me your mail or phone (my mail fercorwin@gmail.com) |
|
| Author: | mimix [ 23 Oct 2009, 17:52 ] |
| Post subject: | Problem with active display port to dvi-D and 1680*1050 |
super ça sera plus facile en français! je t'envois un mail ! edit: lol j'ai posté aussi ici: http://forum.hardware.fr/hfr/HardwarePeripheriques/Ecrans/veulent-configuration-eyefinity-sujet_48960_1.htm#t575208 |
|
| Author: | FragU [ 23 Oct 2009, 23:19 ] |
| Post subject: | Problem with active display port to dvi-D and 1680*1050 |
Try using the adapter in another one of the monitors. Maybe it's a monitor problem. |
|
| Author: | suiken_2mieu [ 24 Oct 2009, 00:18 ] |
| Post subject: | Problem with active display port to dvi-D and 1680*1050 |
Sounds like your monitors support higher res than the native res (blame your scalers) . Eyefinity has been choosing the highest supported resolutions for the monitors (unfortunately) and a lot of people are having similar issues. There are a couple of ways to fix this: 1. Complain to ATI about the bad resolution selection. 2. Hack your monitors supported res. (this is an advance skill and is different for each monitor) I do suggest option number 1 because we all would benefit. |
|
| Author: | Rpmucha23 [ 24 Oct 2009, 03:46 ] |
| Post subject: | Problem with active display port to dvi-D and 1680*1050 |
i ran 3x acer v223w 22" 1680x1050 monitors at 5040x1050 no problem using the dell/bizlink adapter. now running 3x asus 25.5 1920x1200 monitors, no prob. What is the make and model of your monitors? |
|
| Page 1 of 2 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|