Widescreen Gaming Forum

I know, it's common problem for 6XXX series. On my 6970 I have the following connections for 3x1 eyefinity:

DVI-DVI
DVI-DVI
DP-VGA

So, what we have - 2 monitors should have no any tearing at all except third screen since it's using DP-VGA.
But I'm getting tearing on the second screen with DVI-DVI connection too. Why do I get it?

P.S. Is there any chance if 6970 Sapphire with their FLEX technology will avoid this problem?

Thanks

Tearing isn't only a problem for the 6xxx series, but for all video cards that don't have three identical outputs. So buying a card such as a FLEX from Sapphire should resolve you problem. But you are right, you shouldn’t have tearing on two monitors with your current setup. Please make sure that you set a monitor (usually the center one) that is connected via DVI->DVI to be your primary monitor in CCC.

_________________
Philips BDM4065UC(3840x2160) Acer Z35(2560x1080@200hz); 980 Ti Hybrid @stock ; 6700K 4.6ghz (1.35v)/D15; 16GB 3200mhz; Asus Maximus Ranger VIII; AX860; 1TB 960 EVO; 750GB 840 EVO; Teufel Concept D 500; Sennheiser HD6XX; Windows 10 (latest build)

I have no idea why but i never had tearing on my 6970! Might be because i used DVI/DVI/DP nativ.

_________________
We gonna send it to outa space!

I think it's when not all 3 are the same that you can experience tearing on some. I don't think there are any hard and fast rules about which will tear, though I could be wrong. But on my system, my 2 DVI->DVI screens tear, but my DP->MiniDP->DVI screen does not. So I put the non-tearing monitor in the center of my system so it annoys me the least.

_________________
i5-2500K @ 4Ghz ° Asus P8Z68 ° GTX670 Windforce OC ° 8GB DDR3 RipjawsX ° 4x Viewsonic VA2703 ° Logitech G15 / G5 / G27 ° Razer Vespula ° TrackIR 5 ° Thrustmaster Warthog HOTAS

I have no idea why but i never had tearing on my 6970! Might be because i used DVI/DVI/DP nativ.

That cannot be it since I used DVI/DVI/native DP on my 6950 as well and had tearing.

I think it's when not all 3 are the same that you can experience tearing on some. I don't think there are any hard and fast rules about which will tear, though I could be wrong. But on my system, my 2 DVI->DVI screens tear, but my DP->MiniDP->DVI screen does not. So I put the non-tearing monitor in the center of my system so it annoys me the least.

I believe it has to do with different digital signals and that current gpu's can only send one particular kind of signal true all the ports at one time. I have done screen tearing testing on both my 6950 and 7950, both cards respond in the same manner. Whichever screen signal is set to primary (via CCC or Win) doesn't tear including the monitors that are connected via the same kind of port. So on my 6950 I had DVI/DVI/native DP and I had to set one of the DVI monitors as my primary monitor to eliminate tearing on the other monitor that was connected via DVI. On my native DP monitor I had tearing. With my 7950 it is the other way around. It is connected via miniDP/miniDP/DVI and I only have tearing on the monitor that is connected via DVI.

_________________
Philips BDM4065UC(3840x2160) Acer Z35(2560x1080@200hz); 980 Ti Hybrid @stock ; 6700K 4.6ghz (1.35v)/D15; 16GB 3200mhz; Asus Maximus Ranger VIII; AX860; 1TB 960 EVO; 750GB 840 EVO; Teufel Concept D 500; Sennheiser HD6XX; Windows 10 (latest build)

might be a v-synch issue.

_________________
System Core: | Intel Core i5-2500K + ASUS P8Z68-V + 16GB Corsair XMS3 DDR3 1333 MHz | Win7 x64 | MSI R7970 Lightning 3GB [1105/1400] |
Display: | 3 x Dell Ultrasharp 3007WFP-HC @ 7680x1600 | Dell u3011 |