Widescreen Gaming Forum http://www.wsgf.org/phpBB3/ |
|
updated my Th22g but 3x1680x1050 no show.. http://www.wsgf.org/phpBB3/viewtopic.php?f=67&t=16438 |
Page 1 of 1 |
Author: | geniv2 [ 23 Oct 2008, 21:17 ] |
Post subject: | updated my Th22g but 3x1680x1050 no show.. |
just got my 3x 24" monitor and update the firmware on the th2g. I goto the Edit mode on the matrox powerdesk program. the highest triplehead resolution I can see is 1360x768 :( the new high res widescreen modes doesn't even show up :( can anyone offer a suggestion? [/list] |
Author: | geniv2 [ 23 Oct 2008, 22:18 ] |
Post subject: | updated my Th22g but 3x1680x1050 no show.. |
it seems to work now at least from within windows resolution switching. but from within the matrox powerdesk it doesn't seem to show up. form windows I switch to 5040x1050 part of the screen is cut off like the bottom taskbar is cutoff :( |
Author: | scavvenjahh [ 23 Oct 2008, 23:01 ] |
Post subject: | updated my Th22g but 3x1680x1050 no show.. |
Bad scaling maybe ? How does 1680x1050 look (single monitor res) ? |
Author: | Paddy the Wak [ 23 Oct 2008, 23:21 ] |
Post subject: | updated my Th22g but 3x1680x1050 no show.. |
Did you reinstall PowerDesk ? Did you see this thread ... it may help ... http://www.widescreengamingforum.com/forum/viewtopic.php?t=14213 |
Author: | geniv2 [ 23 Oct 2008, 23:23 ] |
Post subject: | updated my Th22g but 3x1680x1050 no show.. |
Bad scaling maybe ? How does 1680x1050 look (single monitor res) ? it looks fine. at single 1680x1050 at 5040x1050 I also noticed something strange. the bezell area between my center and R screen... it seems to have a "bezel management" kinda bug.. my BM is disabled when I move my mouse from the center to the R there's a "gap" in it. but from the center to Left there's no gap it just goes to the L monitor. and also menened the bottom like 100 pixel where the taskbar is is cut off. at 4320x900 everything seems fine though |
Author: | geniv2 [ 23 Oct 2008, 23:40 ] |
Post subject: | updated my Th22g but 3x1680x1050 no show.. |
damn it gets worst. actually the most resolution I can get is 3x1360x768 according to the PowerDesk. even though I can select 5040x1050 and 4320x900 in windows desktop they are just scaled down to 4080x768 :( PowerDesk doesn't show the new high res widescreen resolution that I'm suppose to get :( maybe that's the problem and why things looks funky in 5040x1050 the 3 LCDs I got are 2x Dell E248WFP (connected via analog) my L and R monitor 1x Acer P241WaD connected via DVI EDITED UPDATE: I read all the treads and none of the mentioned worked. some people mentioned that it might be an acer monitor.. I got an acer too. hope its's not that. but I will be getting 3x Soyo Soyo DYLM24E6 24" Widescreen LCD in a week I think |
Author: | meizme [ 24 Oct 2008, 05:05 ] |
Post subject: | actually its probeby the monitor not liking the 57hz refresh |
actually its probeby the monitor not liking the 57hz refresh rate. i have 3 FP202W monitors 2 are v3 and one is v1, on the v1 at 57hz refresh i get sections of monitor in stripes almost were text is fuzzy and if i use bezel managment i get a flattening on the inner side of that monitor about an 8th of an inch in the image is distorted, but not on the other 2 v3's... hope that helps. |
Author: | Mach1.9pants [ 26 Oct 2008, 00:43 ] |
Post subject: | updated my Th22g but 3x1680x1050 no show.. |
Quite a few of us have the bezel management error. I have logged it with Matrox so hopefully a fix will come.... http://www.widescreengamingforum.com/node/9242 http://www.widescreengamingforum.com/forum/viewtopic.php?t=14568 |
Author: | geniv2 [ 27 Oct 2008, 01:56 ] |
Post subject: | updated my Th22g but 3x1680x1050 no show.. |
ok I got the problem rsolved. I got 3x Soyo 24" monitor replacement if I connect all my monitor to the Th2g via DVI it works fine. my games detect it fine. |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |