| Widescreen Gaming Forum http://www.wsgf.org/phpBB3/ |
|
| 3 x 30" Dell Monitors with TH2GO http://www.wsgf.org/phpBB3/viewtopic.php?f=67&t=17482 |
Page 1 of 2 |
| Author: | Purpleraine [ 08 Jun 2009, 17:55 ] |
| Post subject: | 3 x 30" Dell Monitors with TH2GO |
Hello, I been using the search utility a fair bit this afternoon in between breaks at work to find some answers to a few questions that are niggling in the back of my mind before i make some certain purchases. I am wondering with my current setup which is a AMD Quad 3.0ghz Black edition with 4gb ram and Asus Nvidia 295 1796MB graphic card, can I run 3 x 30" Dell 3007/3008 through TripleHead2GO using the native resolution or would it best to use 3 x Dell 2407/2408? I have one of each monitor but wondered if TripleHead2GO would work with 3 x 30" better. |
|
| Author: | Paradigm Shifter [ 08 Jun 2009, 20:05 ] |
| Post subject: | 3 x 30" Dell Monitors with TH2GO |
TH2G can only support 1680x1050x3, so using triple 1920x1200 or triple 2560x1600 is a bit overkill regardless. :( |
|
| Author: | Purpleraine [ 09 Jun 2009, 09:59 ] |
| Post subject: | 3 x 30" Dell Monitors with TH2GO |
Ahh ok thank you, just I see alot of videos with TH2GO using 24" or larger monitors and they look rather nice, so thought that would be a good option to go for. Thanks for your input. |
|
| Author: | Paradigm Shifter [ 09 Jun 2009, 11:52 ] |
| Post subject: | 3 x 30" Dell Monitors with TH2GO |
If you want large monitors with low native resolutions, then three cheap HDTVs would probably fit the bill. But people running triplehead on 1920x1200 or higher screens will be running at non-native resolutions. :( I really want Matrox to work out a way of having triple 1920x1200... |
|
| Author: | skipclarke [ 09 Jun 2009, 17:00 ] |
| Post subject: | 3 x 30" Dell Monitors with TH2GO |
The TH2Go will stretch the 1680x1050 across each 2560x1600 panel. That would be a stretch of 52.3%. I know that Paddy has the 1680x1050 stretching over 1920x1200 panels (a 14% stretch) and says it looks fine. It's all a matter of preference. |
|
| Author: | Paradigm Shifter [ 09 Jun 2009, 18:34 ] |
| Post subject: | 3 x 30" Dell Monitors with TH2GO |
Yeah. I'd agree with Paddy that it looks OK on games - it's just Windows desktop I can't start at non-native resolutions... :( |
|
| Author: | T-Storm [ 13 Jun 2009, 22:22 ] |
| Post subject: | 3 x 30" Dell Monitors with TH2GO |
But can't you get around the scaling in windows and for other text-heavy applications rather easily by using just two 24" screens via the TH2Go and the third 24" connected to the secondary output of your graphics card? Obviously this wouldn't work for games or higher resolutions than (2+1)*1920*1200, but then again in games the scaling isn't really an issue. |
|
| Author: | BHawthorne [ 24 Jun 2009, 03:05 ] |
| Post subject: | 3 x 30" Dell Monitors with TH2GO |
But can't you get around the scaling in windows and for other text-heavy applications rather easily by using just two 24" screens via the TH2Go and the third 24" connected to the secondary output of your graphics card? The way DirectX and OpenGL work, it can't be done like that. The operating system needs to see the whole area as one virtual display, not multiple displays for 3D fullscreen hardware accelerated gaming to work. There would be no need for any TH2G or DH2G product if it worked across multiple displays natively. You can do 4 1920x1200 displays in 3D, but it requires 2 DH2G Digital and XP span mode. There is a thread about my experience with this in the surround-screen sub-forums here. Can't do 3 1920x1200 unless you use SoftTH though. |
|
| Author: | ViciousXUSMC [ 26 Jun 2009, 00:35 ] |
| Post subject: | 3 x 30" Dell Monitors with TH2GO |
Big waist with the matrox, so many pixels will just be scaled. I think softTH can do it right? but it would take one heck of a computer to push it. Id try to look for some small bezel hd tv's for sure if you want 30" or larger. |
|
| Author: | T-Storm [ 13 Jul 2009, 07:11 ] |
| Post subject: | 3 x 30" Dell Monitors with TH2GO |
[quote]But can't you get around the scaling in windows and for other text-heavy applications rather easily by using just two 24" screens via the TH2Go and the third 24" connected to the secondary output of your graphics card? The way DirectX and OpenGL work, it can't be done like that. The operating system needs to see the whole area as one virtual display, not multiple displays for 3D fullscreen hardware accelerated gaming to work. There would be no need for any TH2G or DH2G product if it worked across multiple displays natively. You can do 4 1920x1200 displays in 3D, but it requires 2 DH2G Digital and XP span mode. There is a thread about my experience with this in the surround-screen sub-forums here. Can't do 3 1920x1200 unless you use SoftTH though. I think there might have been a misunderstanding. I meant to suggest (and cleverly package this suggestion as a question), that one might be able to switch between 2*1920*1200 (via TH2Go and DVI Port 1 of the graphics card) + 1920*1200 (DVI Port 2 of the graphics card) for windows/work and 3*1680*1050@57hz (or lower) for gaming. In theory I would think that this should work, by connecting all 3 screens via DVI Ports to the TH2G, and one of the three monitors additionally via either a secondary dvi port on the screen or via dvi->vga or just vga (if the graphics cards offers dvi & vga ports) directly to the graphics card. If my theory holds ground you would just have to switch around in the Matrox Powerdesk and the input signal on one of the monitors. So you could use windows on the native resolution of all three screens and games could be upscaled by the screens. That post certainly exceeded my weekly quota of using the word "screen". ;) |
|
| Page 1 of 2 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|