Widescreen Gaming Forum http://www.wsgf.org/phpBB3/ |
|
cant get 5040X1050. OSD out of range 50.8kHz/48Hz http://www.wsgf.org/phpBB3/viewtopic.php?f=67&t=17727 |
Page 1 of 2 |
Author: | jenxism [ 03 Aug 2009, 01:53 ] |
Post subject: | cant get 5040X1050. OSD out of range 50.8kHz/48Hz |
As the title says i still can get the 5040X1050 running yet. firstly my setup I have the Vista 32 TH2G DE - i have tried beta download and the latest is now installed GTX260 - I am running the 182.5 driver at the moment but tried older also LG W2252TQ - are on the known working list of monitors the best res i can get is 4320X900 60Hz 5040X1050 57Hz is in matrox as an option also nvidia display options and vista display settings. I get the same message everytime i try to switch to it. Out of range 50.8kHz/48Hz I go to custom display and try the setup for 57 and still can seem to get this thing going. I now running out of ideas. Ive been removing and installing drivers for the last 5 days now and nothing..... can anyone help please? |
Author: | thales100 [ 03 Aug 2009, 02:26 ] |
Post subject: | cant get 5040X1050. OSD out of range 50.8kHz/48Hz |
Try the beta powerdesk, i have a similar setup (Vista 32 bits + Beta Powerdesk + 182.50 drivers), plus the same 3 x LGW2252TQ and it works perfectly at 5040x1050 57Hz. You should set 5040x1050 at matrox GXM setup, then click on "change". |
Author: | jenxism [ 03 Aug 2009, 09:21 ] |
Post subject: | cant get 5040X1050. OSD out of range 50.8kHz/48Hz |
Try the beta powerdesk, i have a similar setup (Vista 32 bits + Beta Powerdesk + 182.50 drivers), plus the same 3 x LGW2252TQ and it works perfectly at 5040x1050 57Hz. I have installed the beta powerdesk and have the 182.5 drivers now... same thing works fine on 4320 x 900 60Hz OSD out of range 50.8 kHz/48Hz on the 5040 x 1050 once i change it. whats going wrong for me??? |
Author: | Cygone [ 03 Aug 2009, 15:08 ] |
Post subject: | cant get 5040X1050. OSD out of range 50.8kHz/48Hz |
I had the same problem initially, You need to add a custom resolution in the nvidia control panel as per this post: http://www.widescreengamingforum.com/node/9741 If the resolution already exists as a custom res, delete it first other wise it will not work. Once you have this custom res, test and apply it. You must also be using the PowerDesk-SE (GXM) beta version. i think the bersion number is 2.4.x.x. Dont be alarmed if the 5040x1050 res is the Powerdesk does not work, as mine dont either. Hope this helps |
Author: | jenxism [ 04 Aug 2009, 01:49 ] |
Post subject: | cant get 5040X1050. OSD out of range 50.8kHz/48Hz |
I had the same problem initially, ok so now im getting close.... I have found out what i was doing wrong to get it to not display the OSD out of range. I wasnt selecting the CVT Reduced Blank first. now i do see a picture when i go to custom resolutions... but I enter all the details in and do test, it then says it will now set the custom display mode and revert back if I do not confirm within 15 secs. once i select ok i am told custom mode test failed and it reverts back. How do i save this custom mode? im almost there |
Author: | thales100 [ 04 Aug 2009, 02:34 ] |
Post subject: | cant get 5040X1050. OSD out of range 50.8kHz/48Hz |
Have you tried / set the matrox powerdesk to run your triple setup at 5040x1050 57 Hz ? ![]() |
Author: | whismerhill [ 04 Aug 2009, 02:37 ] |
Post subject: | cant get 5040X1050. OSD out of range 50.8kHz/48Hz |
in some thread I remember one guy using this guide with a GDI refresh rate of 60Hz, might be worth a try |
Author: | jenxism [ 04 Aug 2009, 03:01 ] |
Post subject: | cant get 5040X1050. OSD out of range 50.8kHz/48Hz |
Have you tried / set the matrox powerdesk to run your triple setup at 5040x1050 57 Hz ? I just tried this one and it says the out of range. it seems i just cant get the custom resolution to actually save.After the test and the fail all i am left to do is cancel or close the custom resolution without saving. If i can sort that part out it will all be good. |
Author: | jenxism [ 04 Aug 2009, 03:04 ] |
Post subject: | cant get 5040X1050. OSD out of range 50.8kHz/48Hz |
in some thread I remember one guy using this guide with a GDI refresh rate of 60Hz, might be worth a try i tried the 60Hz also and no joy for me. I just cant seem to get my custom resolution to save |
Author: | jenxism [ 04 Aug 2009, 08:15 ] |
Post subject: | cant get 5040X1050. OSD out of range 50.8kHz/48Hz |
ITS WORKING!!! Thanks everyone for your help and ideas on what to try. I ended up going into the custom resolution settings and after if failed the test i just left it open, I then opened and set 5040x1050 at matrox GXM setup, then click on "change" that was it. It seemed if i closed the custom resolution settings it wasnt saving it but just leaving it open was the trick for me. now to try some games out..... |
Page 1 of 2 | All times are UTC [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |