Widescreen Gaming Forum

I setup my TripleHead Yesterday, I Didn't realize that I didn't have 3 DVI cables for my rig. So I ghettorized one Using 2 HDMI to DVI Connectors and a 10' - 12' HDMI cable for my left monitor.

Do you think it's the cable that keep making it go in and out? Is there a cable size limit from the DTH2Go?

_________________
System Core: | Intel Core i5-2500K + ASUS P8Z68-V + 16GB Corsair XMS3 DDR3 1333 MHz | Win7 x64 | MSI R7970 Lightning 3GB [1105/1400] |
Display: | 3 x Dell Ultrasharp 3007WFP-HC @ 7680x1600 | Dell u3011 |

I kinda fixed it, i used a VGA cable and a DVI adapter and it stopped blinking, but it look mighty weird with an analog signal where as the rest of them are digital.

_________________
System Core: | Intel Core i5-2500K + ASUS P8Z68-V + 16GB Corsair XMS3 DDR3 1333 MHz | Win7 x64 | MSI R7970 Lightning 3GB [1105/1400] |
Display: | 3 x Dell Ultrasharp 3007WFP-HC @ 7680x1600 | Dell u3011 |

there shouldnt be much problem with cable length from the TH2go to the screen, but from the PC that may be a problem. How long are your other cables? can you swap the cable from the middle screen with the left one and see if the problem persists or moves to the middle screen?

_________________
P8Z68-V Pro | 2600K | HR02 | HD5850 | 2x4GB Vengeance LP | 128GB M4 + 6TB | X-Fi > HD595 | AX850 | Tai Chi | PB278Q | G110 + Deathadder 2013
P8Z77-V | 3570K | Mugen 2 | HD5850 | 2x4GB Vengeance LP | 500GB | X-750 | Fractal R3 | U2212HM | G110 + G400
P8H77-I | G860 | 4650 | 2x2GB XMS | 320GB | CX500 | Prodigy | T22B350EW | MX518
DC3217IYE | 1x4GB Vengeance | 64GB M4 | TX-42VT20E