Hello All,
user can buy at Dhgate
http://www.dhgate.com/p_ff808081289b2c6f01289f4361144158.html#0
if you need datasheet,please contact me
Best Regards!
Mviewtech
| Widescreen Gaming Forum http://www.wsgf.org/phpBB3/ |
|
| Mviewtech release MP102-DVI with edge blending http://www.wsgf.org/phpBB3/viewtopic.php?f=67&t=19133 |
Page 1 of 2 |
| Author: | mviewtech [ 11 Feb 2010, 09:07 ] |
| Post subject: | Mviewtech release MP102-DVI with edge blending |
We release product of MP102-DVI with the edge-blending . Edge blending is a pure hardware design, without any delay. Users can play 1080P videos, play 3D games, does not affect any performance of graphics cards. We provide 0-511 overlap setting, user can adjust the gamma, p and alpha parameters. Using our products can link to two projectors resolution from 1024x768 60HZ to 2048x1200 60HZ, also supported part of the 3D projection, such as a resolution of 1024x768 120HZ, or 1280x800 120HZ.Part of the resolution need to customize. input interface : one dual link DVI interface .maximum pixel clock 330Mhz output interface: two DVI-I(can DVI and VGA simultaneously),maximum pixel clock 165Mhz accessories:one 1.5m Duallink DVI cable,one 5V/2A power supply(100-240V) AC ,one RS-232 cable dimension:165mmx130mmx28mm warranty:2 year limited warranty Best Regards! Mviewtech |
|
| Author: | mviewtech [ 14 Mar 2010, 04:50 ] |
| Post subject: | Re: Mviewtech release MP102-DVI with edge blending |
Hello all, the support resolution Project resolution refresh(HZ) Overlap width 800x600 60/75 0-512 1024x768 60/75/120 0-512 1280x1024 60/75 0-512 1280x720 50/60 0-512 1280x800 60/75/120 0-512 1366x768 60 0-512 1400x1050 60/75 0-512 1600x1200 60 0-512 1920x1080 50/60 0-512 1920x1200 60 0-512 2048x1080 50/60 0-512 2048x1200 50/60 0-512 Best Regards! Mviewtech |
|
| Author: | mviewtech [ 11 Apr 2010, 23:52 ] |
| Post subject: | Re: Mviewtech release MP102-DVI with edge blending |
Hello all, I place a video at http://v.ku6.com/show/yqByX01YbWFWKcLD.html 1. two Optoma 1080p projector 2. edge blending width 360 pixels 3.computer output resolution 3480x1080P Best Regards! Mviewtech |
|
| Author: | mviewtech [ 16 May 2010, 05:13 ] |
| Post subject: | Re: Mviewtech release MP102-DVI with edge blending |
Hello All, user can buy at Dhgate http://www.dhgate.com/p_ff808081289b2c6f01289f4361144158.html#0
if you need datasheet,please contact me Best Regards! Mviewtech |
|
| Author: | l88bastard [ 12 Jul 2010, 07:30 ] |
| Post subject: | Re: Mviewtech release MP102-DVI with edge blending |
Great looking product, its just waaaay to expensive! |
|
| Author: | mviewtech [ 06 Aug 2010, 08:53 ] |
| Post subject: | Re: Mviewtech release MP102-DVI with edge blending |
Hello All, we set up edge blending system with two projectors(Benq 670). I place some picture for testing by our company. the overlap is 256 pixel. 
pure black with black level compensation 
Best Regards! Mviewtech |
|
| Author: | mviewtech [ 14 Aug 2010, 14:08 ] |
| Post subject: | Re: Mviewtech release MP102-DVI with edge blending |
I post some video at http://v.ku6.com/show/wSmElYAISRMsnsJZ.html user can download datasheet for our device (MP102/MP103) hardware edge blending unit at http://www.mviewtech.com/en/faq.asp?video2 Best Regards! Mviewtech |
|
| Author: | Snipe3000 [ 10 Jan 2011, 13:50 ] |
| Post subject: | Re: Mviewtech release MP102-DVI with edge blending |
Nice stuff, just way too expensive. |
|
| Author: | screenglued [ 08 Jul 2011, 16:27 ] |
| Post subject: | Re: Mviewtech release MP102-DVI with edge blending |
If you can come on here and give a little bit of justification on the price I might be willing to look in to this. Why so expensive? |
|
| Author: | BHawthorne [ 09 Jul 2011, 06:55 ] |
| Post subject: | Re: Mviewtech release MP102-DVI with edge blending |
Fully integrated hardware edge blending options on the market are never inexpensive. If you don't need hardware edge blending there are options out there to use their MV103 box and software edge blending and pre-warping at lesser cost. I'll be experimenting with their MV103 box in a few weeks time with a third party software pre-warping utility. The main difference is, hardware vs software implementation of pre-warp and edge blend technology. Everything being equal, I'd prefer hardware edge blending because it does not require software running on a computer to enable it once it's calibrated. |
|
| Page 1 of 2 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|